Ceramic - Porcelain Tiles Podcution, PRESS & POWDER FEEDING, Glaze Line, Maintenance Staff Urgently Required for Abu Dhabi (UAE)

SECTION	JOB CODE	POSITION	DESCRIPTION
BPS	BPS/001	Spray Drier Oper.	Ensure the availabilities of slip, silo and utilities to meet the Production schedule.
			Coordinate and follow up with ball mill operator regarding slip pumping, storage etc. for proper work flow in the section.
			Coordinate with powder feeding and mixing sections regarding silo storage status.
			Maintain the slip and powder parameters as per specifications periodically and update into records. Observe and correct deviations and highlight the same to the Supervisor / In-charge.
			Perform the corrective and preventive actions for the process deviation and any foreseen problems.
	BPS/002	Ball Mill Oper.	Ensure recipe and raw material availabilities according to the production program.
			Coordinate and follow up with crushing section regarding material status in PDM silos.
			Operate the machine and make sure it is in good running condition to deliver the targeted production as per Porcellan specifications.
			Perform the corrective and preventive actions for the process deviation and any foreseen problems.
			Inform any abnormality found to the concerned section for corrective action.
			Maintain the slip parameters as per specifications periodically and update into records. Correct any deviation and highlight the same to the Supervisor / In Charge.
	BPS/003	Crusher Operator	Responsible to monitor the crushing operation of hard materials and clay materials and ensure to comply with all requirements as per the production program.
			Operate the machine and make sure it is in good running condition to deliver the targeted production as per Porcellan specifications.
			Perform the corrective and preventive actions for the process deviation and any foreseen problems.
			Check and maintain the crushed material parameters, adjust any deviations found and inform the Supervisor accordingly.
			Correct abnormalities found in the section and highlight the same to the Supervisor / In Charge.
	BPS/004	Shovel Operator	Responsible for the loading of raw materials for crushing and ensure to comply with the production program.
			Perform the corrective and preventive actions for the process deviation and any foreseen problems.
			Check any deviation of crushed materials in the bin area and inform the Supervisor.
			Correct any abnormalities found in the area and highlight the same to the Supervisor / In-charge.
PRESS & POWDER FEEDING	PRESS/001	Press Supervisor	To supervise the operation in the Press and Powder Feeding Section and ensure all requirements are met as per Production program.
			Ensure the maintenance of the press and dryer machines and ensure it is in good running condition.
			Maintain and update the corrective and preventive actions for the process deviation and any foreseen problems.
			Correct any deviations / abnormality in the process and highlight the same to the In-charge.
			To check the availability of all types of powders, and follow the feeding and mixing plan.
			Ensure the calibration of weigh feeders.
			Ensure cleaning at silo feeding and press during colour change to avoid contamination problem.
	PRESS/002	Press Operator	Coordinate and follow up with powder feeding concerning silo status and powder feeding sequences.
			Ensure that hoppers, micronizers, bucket elevators and conveyors are properly cleaned during design changes.
			Perform the corrective and preventive actions for the process deviation and any foreseen problems.
			Coordinate with press mechanics during mould and punch changes or any press maintenance works.
	PRESS/003	Press Mechanic	Responsible for press and dryer machine maintenance, moulds, preventive maintenance of machineries and related production responsibilities.
			Perform preventive maintenance of the press and dryer machine.
			Check the availability of moulds, punches and other machine spares.
			Coordinate with Supervisor / Operators i.e. (double charge, salt and paper, etc.)
			Check and ensure the press parameters and correct any deviations observed. Highlight the same to the In-charge.
	PRESS/004	Forklift Operator	Responsible for changing the moulds and dumping of green tiles scrap to the designated area.
			Transfer the scrap tiles / powder in the dumping area as instructed by the In-Charge.
			To cooperate with press operators and powder feeding operators for the removal and transfer of scrap materials.
			Ensure proper maintenance of the forklift
			Follow safety procedures and ensure the use of PPEs in the section.
			Ensure prevention of accidents in the section and comply with all standards to accomplish HSE objectives.
	PRESS/005	Powder Feeding Oper.	Check and follow the powder feeding schedule as per section supervisor.
			Coordinate and follow up with press operator and spray dryer operator / supervisor regarding silo status and powder feeding sequences.
			Ensure that all the silo delivery points, bucket elevators, intermittent silos and conveyors are properly cleaned during shade change.
			Ensure flakes preparation according to chroma design requirements.
Glaze Line	GL/001	Glaze Controller	Keep and maintain sufficient quantity of glazes etc. during and at the end of the shifts to maintain line continuity.
			Coordinate with press department to utilize the press and horizontal dryer gaps for cleaning the application equipments and design changes.
			Check and follow the hourly sample and inform the Supervisor for any deviation.
			Ensure engobe and glazes are properly sieved.
	GL/002	Printing Operator	Ensure the pastes are properly sieved.
			Keep and maintain sufficient quantity of pastes, etc. towards the end of the shift to maintain line continuity.
			Coordinate with press dept to utilize the press and horizontal dryer gaps for cleaning and design changes.
			Coordinate with glaze preparation regarding supply of pastes and granules.
	GL/003/004	Techno Ferrari Operator / Sample Operator	Send samples every one hour and update into the records.
			Collect sample display in the Glaze and highlight the result to the Supervisor.
			Arrange bottom engobe in all lines and ensure bottom application.
KILN	KILN/001	Kiln Supervisor	Responsible for supervising the operation of green tile firing and ensure all requirements are met as per production program.
			Check green tile availability ready for firing and give the written instruction to T.G.V operator and kiln loading operator.
			Monitor the kiln unloading palletizer machine for proper storage of fired tiles with proper identification.
			To maintain, update the logbook/records and to handover the shift activities properly to the reliever.
			Monitor the machine, ensure it is in good condition, and deliver the targeted production as per Porcellan specifications.
			Maintain and update the corrective and preventive actions for the process deviation and any foreseen problems.
			Check and record the quality output such as size, warpage, flatness etc., from kiln.
	KILN/002	Unloading Operator	To unload fired tiles, properly palletize the tiles on pallet with the help of sucker machine. Ensure to keep the pallets in the parking area with proper product identification.
			Assist mechanics during the machine maintenance and adjustments of machine for size change.
			Work along with kiln controllers during roller change and in case of emergency.
			Observe the machine function and inform the kiln controllers/kiln in charge if machine requires any special attention or maintenance.
	KILN/003	Loading Operator	Ensure smooth operation of box unloading and kiln loading machine.
			Assist mechanics during the machine maintenance and adjustments of machine for size change.
			Work along with Kiln Supervisors during roller change and in case of emergency.
			Frequently check bottom wash coat of green tile and inform glaze line supervisor/kiln controllers if any attention is required.
			Observe the machine function and inform the Kiln
			Supervisors / In-charge if machine requires any special attention or maintenance.
	KILN/004	Roller Grinding Oper.	Remove any material deposit that gets on the roller during kiln operation.
			Observe the machine function and inform to Kiln Supervisor / In-charge if machine requires any special attention or maintenance.
			Work along with Kiln Supervisors during the roller change and in case of emergency.
			Put wash coat to the cleaned good rollers with the required density of engobe.
	KILN/005	Forklift Operator	Responsible for transferring rejected green tiles and fired materials in the designated area.
			Transfer rejected green tiles from Kiln and Glaze section to the scrap yard.
			Transfer rejected fired tiles from Kiln and Polishing section to the scrap yard.
			Shift the roller trolleys from the roller grinding machine to the kiln area during roller changing.
Polishing & Squaring	PS/001	Supervisor	To supervise the operation of Polishing and Squaring Section and ensure all requirements are met as per production program.
			Plan the product to be squared / polished as per production program in coordination with production coordinator.
			Ensure the configurations of calibration and availability of polishing tools as per the requirements.
			Ensure the machines are working properly. Coordinate with Maintenance for any problems in the machineries. In case of pending job, record in the logbook for follow up by next shift supervisor.
			Monitor the machine, ensure it is in good condition, and deliver the targeted production as per Porcellan specifications.
			Maintain and update the corrective and preventive actions for the process deviation and any foreseen problems.
	PS/002	Polishing Operator	Check and maintain machine and ensure its proper condition.
			Check the water line, polishing head and pipe lines.
			Check the abrasive life span and replace it once broken.